customer demand

1. In the whole process of the experiment, it is necessary to use soft and thin hose to directly contact with mice. If the precision is required to be high, Chuang Rui injection pump zs100 can be used. If the precision is not particularly high, Chuang Rui bt100lc series products can be used.

2. The hose is imported pharmaceutical grade hose with better anti adsorption capacity and ultra-low spillage, which is more suitable for similar experimental applications

Solution

1. The liquid is a mixture of solid and water, and the hose selected should be a pump with thicker wall.

2. The maximum requirement of customer flow is 8L / min, and Chuang Rui industrial product bg600-s can be considered.

3. External control full control, can use the central control system or PLC to directly control the belt degree, direction, start and stop of the pump through analog quantity or RS485.

4. The hose of the pump can be equipped with imported hose with a continuous service life of more than 2000 hours.

Generating value

1. High fluid transmission accuracy:

Chuang Rui peristaltic pump bt100lc series products, quantitative accuracy ≤ 2%

Injection pump stroke control error in laboratory ≤ 0.5%

2. It can avoid cross contamination in the process of fluid transmission. When peristaltic pump and laboratory injection pump transmit fluid, the fluid is only mixed with hose or syringe

Syringe contact hose and syringe are easy to clean and disinfect to meet the requirements of health standards.

3. Chuangrei bt100lc products have a variety of working modes to meet the different needs of customers

Quantitative mode: the total amount can be set directly and transmitted at a constant speed

Timing mode: it can be set to transport at constant speed for a certain time and then stop automatically

Timing quantitative: can directly set a certain amount of transport completed in a certain period of time

Constant current transmission function, this product basically covers all the functions of peristaltic pump in the industry, the same cost, different functional experience.

4. External control full control products, two products are equipped with RS485 or analog (0-5V, 0-10V, 4-20mA) control, if the user needs to use external control later

To control our products, we only need to set it in the pump, and there is no need to send back the product to change the program again.